What tail servo for 450 V2

[mattie-lodge]

Hi All,

What tail servo's are you running on your 450's? Also what main servo's are you all running

Cheers

Matt

[millsy]

Hiya matt i dont know what tail servo i want to use on my t-rex se. On the main servo im runing are HS-65HB KARBONITE GEAR. Hope this is any good to you.

MILLSY

[Thomas]

I going to try one of these next, http://www.realraptors.co.uk/zen-car...oducts_id=2063

Have HS65mgs on the swash.

[moyesboy]

HS65mg to quote a small fraction of BobJ's recommendation for cyclic (he sent a meassage with that repeated over and over).
I had HS65HB on cyclic and as I broke gears I upgraded with the mg gear sets.I currently have one set of HB gears on the back cyclic servo and might swap that for metal before I beak the plastic. BobJ reports he broke the karbonite in the air in hard 3D (but he is well hard).
on the tail I run a HDS577 from ashtek electronics. This is OK but does wear out (on my second). I can't bring myself to pay for a 9650. The JR suggested is tabout the same +£50 price. Encouraging is there is a new robbe fs61BB speed digital for the tail that robgt is running and says is the mutts nuts and it shoudl be £30 when a shop stocks some in the UK.

[SRH990]

I going to try one of these next, http://www.realraptors.co.uk/zen-car...oducts_id=2063

Have HS65mgs on the swash.

Hmmm, their idea of a 'Digital high speed servo' differs a little from mine, 0.13s is a little on the slow side for a tail servo, no?

[ChrisB]

Futaba 9650

[Thomas]

Hmmm, their idea of a 'Digital high speed servo' differs a little from mine, 0.13s is a little on the slow side for a tail servo, no?

Slow? confused, the JR is .13, the 9650 - probably the most popular tail servo for a 450 sized heli ever is .14. I've seen some very good people fly 9650's and they seem fast enough for them.

[Richie b]

S3153

If you want something a bit cheaper than a 9650 have a look at the 3153

ok so it has less torque than a 9650 but it is 0.11 sec at 4.8v

i have just replaced the hds-577 on the tail of my Caliber 400 with one and it rocks

[robgt]

robbe fs61BB speed digital for the tail that robgt is running and says is the mutts nuts

Still is
Dave and I both have them on (although my rex is in need of a new head at the mo), and Daves is performing perfectly - still.
It just needs to stand the test of time for me now - but so far so very very good.
Cheers,
Rob

[Ade_Law]

i plan on using HS65mg and a futaba 9650 if i ever manage to work out how im gonna afford one...

Ade

[Ashley Davis]

If you want something a bit cheaper than a 9650 have a look at the 3153

ok so it has less torque than a 9650 but it is 0.11 sec at 4.8v

After the nightmares I had with the 3154 I have a hard time being persuaded to try another Futaba micro digital.

[infacto]

Hi
I'm using
HDS-577 18g Micro Digital Servo
CODE: AE-SER-001
Shipping weight (g): 40.00

Price: £18.71 (£21.98 inc VAT) on my tail.

Just cheep ones on the rest.


Infacto