Today, I am trying to setup my curves. No 3D stuff. Just calm, stable slow flight. So, I'm thinking about this (Graph and details attached). Is there a way to see what my headspeed would be without a tachometer? Also, is this a good curve setting?
Announcement
Collapse
No announcement yet.
Pitch and Throttle curves
Collapse
X
-
Pitch and Throttle curves
Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
Blade CX2 - With AR6100
Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
Based in Brisbane , Australia!
Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550
Tags: None
-
Cralis,
I'd have a look here.....
http://www.trextuning.com/setuptrex.php
Loads of good advice etc. I've just had a quick look at it, bear in mind yours is an SE so not everything will apply, but it's this site that got me off the ground for the first time!
I'm still a beginner, but the only thing I would change on the pitch curve on the site is to set it so that you have 1 or 2 degrees negative pitch at low stick to help the heli come down i.e set point 1 at about 35 - 40%. That's a personal choice though
Simon
Comment