Does this look ok?

[rombonie]

All the rods are in the 3rd hole out on the arm,I ended up having to do this as I could not get enough up/down travel in the pitch as for the head speed I'm using an 11 pinion gear! that sounds wrong just writting it!!! So no idea as to actual RPM.

As you say the angel can play tricks but the servo arm in view looks slightly up and would better perfectly level, make sure the opposite is excatly.

I run it with the 12 and in norm mode throttle curve is set to 0-50-75-82.5-90 with the pitch curve set to 42.5-46.5-50-75-100 and expo at 80% (thats of full), this setup calms it down nicely

hope that makes sense

[edison]

Yes it does say Copterx on the head,I had to replace it after the other one was damaged and I don't have a money tree in my garden.

So what pinion would suit a non 3D basic flyer?

[rombonie]

Thats all i am really..lol

The 11 is will give a lower head speed so you will need to have you throttle curve set accordingly, I'm sure there is an thread on this somewhere I'll have a look...

Just a thought, are you running carbon blades or woodies?

[edison]

Carbon ones

[rombonie]

Forgot, noticed you've got your gyro top mounted, i would move it below if possible

[edison]

Ok.... but why?

[rombonie]

Carbon ones

great no head speed issue's there then

[rombonie]

Ok.... but why?

Because there's a good chance if you bin it, the blades will have it for dinner

[edison]

Sounds logical to me

[rombonie]

It wouldn't be the first top mounted gyro to bit the dust