FF9 and Trex ccpm

[Arwel]

Hi,
Which swash type do you use on the FF9 for the Trex 600 nitro?

Thanks Arwel.

[Disc]

Hi,
Which swash type do you use on the FF9 for the Trex 600 nitro?

Thanks Arwel.

Swash SR-3

[TrexMADuk]

but cause the swash is backwards you may need to go - (minus ) nos on the swash mix window... EG .... E+60 , A +60, P -60 only an example... otherwise you dont get the correct movement on all axis on the swash...

[Disc]

Use Servo reverse 1st to get the servos working the same way together 1st.

Then use Swash AFR to make them go in the right direction...

That makes no sense does it


Okay so with SWR-3

Now plug in the 3 servos. Now put a servo horn on each one and now you want them to all move the same direction so when you push the pitch up they all move the same way up or down doesnt matter.

once thats done with servo reversing

Then go into Swash AFR and make the servos + or - to make them work together....

-50 or +50 will do the job on the 600

[Arwel]

Sorted, thanks guys-just got my 2.4Ghz 7 channel rx, so let the setup begin!!!

[BobJ]

Hi

Basic CCPM set up tips are here} https://www.skylinemodels.co.uk/Link....php?pageid=13

I will fill it out with radio/model specific info when time permits.

Hope it's of help.

Bob J

[Arwel]

Thanks guys, I have noticed that as I raise the pitch, the swash does not move up level, seems as if the servos don't move up equally, or at the same speed. I am using the Align round servo horns.

Cheers Arwel.

[TrexMADuk]

double check all atv's and trims they should be all the same...