600 nitro V2 limited edition FBL head options.

[panosg]

Hi all.
Is there a FBL head available for the V2?
If anyone knows, will you be kind enough to show me links of what i will need.
I am really getting confused of all the options out there

Cheers
Panos.

[monsul]

Hi all.
Is there a FBL head available for the V2?
If anyone knows, will you be kind enough to show me links of what i will need.
I am really getting confused of all the options out there

Cheers
Panos.

Take a look here: Upgrading a TRex 600Nv2 LE to flybarless | dotHeli

I went through the same some months ago and put it on a web page

[panosg]

Take a look here: Upgrading a TRex 600Nv2 LE to flybarless | dotHeli

I went through the same some months ago and put it on a web page

You sir is a legend..... thanks you.

[LipolyGone]

Get the DFC head on it Rob Turnbull shows you how here on midlands team web page

Fitting a DFC Head to the T-Rex 600 Nitro « Team Midland

[scuba steve]

ruling out the DFC head (i don't want to be drilling my own main shafts).......what are the options for a V1 600LE ?

[waveydavey]

ruling out the DFC head (i don't want to be drilling my own main shafts).......what are the options for a V1 600LE ?

In what way? Flybarless conversion?

[waveydavey]

Take a look here, this is the standard flybarless head for the 600

Align T-Rex 600N Flybarless Head Conversion | Midland Helicopters Ltd

Mine has the new 600e pro headblock with integrated swash driver. Coupled with the fbl new mainshaft which is 10mm shorter this takes the overall reduction to 20mm. With this you need the 550 swash to blade grip links

http://www.modelhelicopters.co.uk/60...r-housing.html

You need different balls on the inner swash too (shorter)

[milly0812]

ruling out the DFC head (i don't want to be drilling my own main shafts).......what are the options for a V1 600LE ?

They do a DFC shaft for the 600 ESP will this not fit the nitro??
http://www.fast-lad.co.uk/store/h602...)-p-19599.html

[waveydavey]

No it wont. The DFC shaft has a raised ring that goes against the top bearing. I don't think the standard 600 will take it. Unless the distance is the same from the underside to the centre of the bottom Jesus bolt

[Lynx.1677]

Align are bringing out DFC shafts for the 600 nitro shortly. Confirmed by Skyline models recently.

[panosg]

I think I may just wait for the DFC shaft as I don't fancy drilling and cutting down main shafts every time I need one.

Or go with monsul's option.

Thanks guys.

[moonmanflyer]

I would wait for the DFC shafts panos, it makes a real noticable difference

[panosg]

Ok so I couldn't wait for the new DFC shaft from Align so I modified mine.
Here are some pictures of the modified shaft for those who are interested.

20120905_105119.jpg20120905_105519.jpg

All measurements I got them from here ( Thanks Rob )

DFC head should be her today and hopefully on the 600 by tonight.