Just made a fuel filler bracket for my trex 600 how come I never see any others??

[kendell1992]

Here's mine !IMG_00000024.jpg

[Gingerr6]

hard to see... little more info, looks kool

[Gixxer]

It looks pretty neat, but you seem to have a lot of very tight bends in that setup.

[kendell1992]

hanks guys and basically that's the only place it could go so that the side that shut off was facing the car and the bends are kink free so far but I'm yet to see what will happen in flight I will post a picture of it close up.

[Eckchaz]

Nice job but you do know theres a easier quicker & lighter way... a K&S bracket

[kendell1992]

IMG_00000025.jpgIMG_00000026.jpgIMG_00000027.jpg
I just made a bracket that went across 2 of the existing bolts and drilled a 10 mill hole in it.

[kendell1992]

Nice job but you do know theres a easier quicker & lighter way... a K&S bracket

with the valve I put in it cuts off flow to the car when the filler plug is in so you don't flood the carb/engine so it won't hydraulic.

[Eckchaz]

Arrr.. Now I see why you have made this.. you have the quick filler valve

From the other angle it looked too much work and I misread it a filter and not filler lol!

EDIT: Took to long typing above.. and didnt see your post.. which both say the same.. kinda

[kendell1992]

Arrr.. Now I see why you have made this.. you have the quick filler valve

From the other angle it looked too much work and I misread it a filter and not filler lol!

EDIT: Took to long typing above.. and didnt see your post.. which both say the same.. kinda

ah right no worries lol

[mark_w]

Be aware of those quick fill 3 way values, I had one fail on me, it got stuck and it took a while to work out while the engine would not start.

[Sesame]

Youll also need to keep a close eye on it for air seaping into it, youll notice with the engine not running evenly.

[Paulo uk]

My quick filler also died pretty quickly after purchase!

[kendell1992]

hi ive decided to get rid of the du bro quik filler valve as it is bust as you guys said thanks. do you have any idea were i can buy the fuel pipe bung that clips to the pipe off the fuel tank from in this picture i know were to get everthing else. i am planning on using the same setup it looks good.

regards danny