revlock20

[bumps]

hi there

can you help just fitted a new revlock 20 to my trex 600 when the revlock starts to engages the head speed go's way up and then back down to the 1800 its set at and stays when in flight it and disengages ok

peter

[Mike W]

what throttle servo you running ?? .. When you set it up did you have the end point for idle in the normal position that it ticks over at ?? .. what kind of go up and ?? fast overspeed then settles back to governored speed ?? little more info would be helpful

[bumps]

hi mike

servo is a futaba dig s3512 idle set as you say on tick over as you push the throttle stick to engage the ravlock it over speeds for 1/2 seconds then comes back dowen to the wright head speed were it should be like it's soft start it reveres

[GIXERMAN]

if your stuck, speak to colin at csm, he is very helpful. number is on there website

[Mike W]

what throttle curve you got on your transmitter ?

[bumps]

throttle is

00
35
45
65
100

i did try to csm for chatch be for i got one but thay never pick up phone !

[Mike W]

Strange one this ... lower position 2 from 35 to say 27 and see if it still does it .. sounds like the throttle settings in the tx are too high and its going to the curves before the governor kicks in ...

[bumps]

ok mike ill give it a go next weekend can do no harm and iam lost eneyway on this ill let you now how it go's

manks thnks

also i you can help on this one a well here is a new one the guy i fly with has problem wit his autorotation gear sizeing up has change the one way bear and mine sharft still seizes up


thnks

peter