T-Rex 600 Nitro LT &b DX8 setup files

[A11an]

Hi, just bought a second hand 600 nitro limited edition and was wondering if anyone would like to share their setup files?

thanks

Allan

[DaveMac]

Is the helicopter setup correctly mechanically? You really need this first then work on the radio setup. Also if it's 2nd hand I'd be stripping it down and checking it's all threadlocked properly.

[A11an]

Hi, yes it's all set up and was with a DX8 the same as mine but the guy sold the transmitter first, it was built by Fast Lads and looks an excellent job. I will be checking it all but just wanted to get a head start with the set up as it different to anything I've had before.

thanks

Allan

[Gate88]

Send me your email address and I'll fire you over the .SPM file for my 600.

[A11an]

Thanks Gate88 much appreciated

Allan

[Andy from Sandy]

I'd be stripping it down and checking it's all threadlocked properly.

If after taking the model apart and you find that it has been threadlocked properly then what?

[Gate88]

Thanks Gate88 much appreciated

Allan

You should have it. But bear in mind mine's an AR8000, Beast X, with an RJX head & JR servos so it will probably still need a lot of refining before you try flying yours!

[DaveMac]

If after taking the model apart and you find that it has been threadlocked properly then what?

Put it back together as per manual?

[A11an]

There's something I'm not getting with the pitch as it needs reversing but doesn't seem to reverse like anything else I've had, if I reverse the cyclic go all wrong, some sort of mixing I think.

[A11an]

You should have it. But bear in mind mine's an AR8000, Beast X, with an RJX head & JR servos so it will probably still need a lot of refining before you try flying yours!

Is that file for a DX7 or 8?

Allan

[Gate88]

Is that file for a DX7 or 8?

Allan

A DX8, you can't extract data from a 7.