Announcement

Collapse
No announcement yet.

T Rex 600 nitro radio gear help?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T Rex 600 nitro radio gear help?

    Hi all, need some help deciding what radio gear to put in my t Rex, can anyone recommend anything? Or make?

  • #2
    My 600 has, Spektrum AR7000 Receiver (I use a DX7), Align 2-1 Regulator, Align Governor, Align GP750 Gyro, and Align Servo's on Cyclic (610's) & tail (620) and a JR Servo on the throttle. It flys perfectly well for me with this setup
    Del
    Outrage Velocity 50 N2 FBL, OS55 Powered -Built and almost ready to fly

    Climb-Out

    3D Scotland

    Proud owner of 2 EGS

    Comment


    • #3
      Align DS 610 on cyclic, 620 or 650 on tail. Whatever you want for throttle. If your going flybarless then take your pick down to your budget from whats out there, I use a BeastX. If not then consider a second hand gyro, for me it would be the CSM SL720, only problem being it has to go on the back as it doesn't fit under the canopy. Consider using LiFe packs for electrics avoiding a regulator and 2S LiPo. Some for of governor is nice but not necessary. I use a Throttle Jockey Pro from Model Avionics but others work fine.
      Humble owner of 7 Eddie Gold Stars and Ex - member of Mk Heli Club
      sigpic

      Comment


      • #4
        your budget would be helpful
        plus letting us lot know if/what tx you have as to the make or the rx to use
        Hirobo Turbulence D3
        a bunch of bls servo's and a 701 gyro
        Powered by an OS91 hz and a MP2
        Winner of the LHC Scale Cup 2011

        1/4 scale Vario Bell 47 G3
        1/3 scale Vario R22
        2012 LHC Scale Cup Judge
        member of save the flybar foundation
        www.alcesterhelicopterclub.bmfa.org
        sigpic

        Comment


        • #5
          I have no ideas what the radio gear will be, so I gave not set a budget, I want to go futaba if poss, what wud price be roughly including servos and gyro

          Comment


          • #6
            610's new about £120 for 3 add £40 for the 620. £60 or so for a 720 or similar throttle servo £30. Add £35 for a couple of packs or £40ish for a 2 in1. £40 or so for a governor (not needed).
            Humble owner of 7 Eddie Gold Stars and Ex - member of Mk Heli Club
            sigpic

            Comment


            • #7
              With tx is around £500.

              8fg and tx is £300
              3x610s are £100
              £50 gyro
              £50 tail servo
              x 3

              Comment


              • #8
                ive just finished building my Vision 50 comp which is simular to the trex 600.
                to give you a rough price guide this is what ive fitted in it and paid.

                3x Align DS610 servos on the swash (£120 for all 3)
                1x sparton 760 tail gyro (i paid £40 second hand)
                1x DS620 tail servo (£40)
                1x futaba S3050 on the throttle (£37)
                1x Align 2in1 reg (£40)
                With a futaba 8FG Tx and 6 channel rx (£300)

                I dont think youll go far wrong with a set up like this.
                I baught all but one items for my heli brand new, but if you keep an eye out you can get some pretty good kit for a good price.
                Trex 600N DFC
                Logo 600SE
                Goblin 700
                Spektrum DX9

                Comment


                • #9
                  Ive got
                  AR000rx,
                  DX7,
                  Align 610 cyclic and throttle,
                  Align 620 tail,
                  Align GP780 Gyro,
                  FlightTech 8amp reg,
                  Galaxy 2500mah lipo

                  Hope this helps, its a very reliable setup and provides good power.

                  Click to visit RC Hero or visit
                  www.rcheroflightteam.co.uk for the flight team blog.

                  Comment

                  Working...
                  X