Announcement

Collapse
No announcement yet.

trex 700 tailblade holders!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trex 700 tailblade holders!

    saw yet another metal tail blade holder flyoff and a 700 go in today,

    is it just the metal tailblade holder or the plastic this happens to? if its just metal then im changing mine!

    cheers
    Chris 'CHUNK' Newby
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk

    ALIGN-TREX.CO.UK team pilot
    LYNX team pilot
    SPARTAN team pilot
    Dx18

  • #2
    I have read somewhere that the bolts in them are off poor quailty and a lot of the top pilots replace them with dubro or minture aircraft bolts
    360 RC Technologys (Align )
    Optipower /Optifuel
    3d-ireland.com





    Comment


    • #3
      It is down to the bolts, as the v1 type tail hubs put more stress on the bolts, but i think the new v2 tail puts less stress on the bolts and thus prevents them shearing, by being designed better with 2 radial bearings! Hope this helps! But just to be on the safe side use stronger bolts aswell!

      HN6103A V2 Metal Tail Rotor Holder In Silver

      Click to visit RC Hero or visit
      www.rcheroflightteam.co.uk for the flight team blog.

      Comment


      • #4
        You don't see many failures with the plastic grips. People upgrade the bolts and use a third bearing, or the other options include the quick uk tail or the new align V2 tail.
        Cheers,
        Simon
        --------------------------------------------
        Trex 700N & E
        Futaba 18mz and some planks !!

        x 2

        Comment

        Working...
        X