Cellpro pl8 parallel balance board Question

[NiceBlades]

Hi, since my batteries are now in the country I need to buy a decent charger in the cellpro pl8 and I need to know if the polyquest/Thunderpower balance boards work with the zippy & Turnigy balance connectors please? I've ordered the turnigy 3300's with jst-xh balancers: HobbyKing R/C Hobby Store : Turnigy 3300mAh 6S 30C Lipo Pack. I was told by a model shop that they would but it's not a shop I've used before and I'd like to be sure before spending my hard earned,Many Thanks, Ian.

[cjcj1949]

Seems a bit unlikely to me without adapters.

[Martind]

i have just bought a icharger 306b from eleticwingman and a couple parallel boards (jst xh) from hobbyking for about £150. Running off 2x800w psu and all i can say is dam fast compaired to what i'am use to 5x 6s-5000mah in an hour

[Eckchaz]

Nice Blades, No they wont mate.. you need to buy the JST-XH balance boards as they TP connectors are totally different

ma88ut, what psu's are you using? I'm thinking of getting the 306B or maybe the 208B as they are more than what I need from a charger at the mo

[Martind]

Nice Blades, No they wont mate.. you need to buy the JST-XH balance boards as they TP connectors are totally different

ma88ut, what psu's are you using? I'm thinking of getting the 306B or maybe the 208B as they are more than what I need from a charger at the mo

Eckchaz i have 2x 800w server psu's from ebay, think i payed £25 apice then some 4mm plugs and wire so about £70
I can recommend eletricwingman, they have both in stock and i couldn't find them cheaper

[NiceBlades]

Eckchaz i have 2x 800w server psu's from ebay, think i payed £25 apice then some 4mm plugs and wire so about £70
I can recommend eletricwingman, they have both in stock and i couldn't find them cheaper

I'll only be charging 6-8 3300mah 6s lipo's at the most.....can you post or pm me the link/instructions you followed to create your psu's please? Think this might be the way to go, was going to get a cellpro as its future proof, but the only viable psu I can find for it on a stretched budget is 145 pounds!