Mounting CY ATG Sensor?

[AGW]

Anyone got any tips??

I was under the impression you could use the CSM mount on the 600N, but I had a look yesterday and the offset seems too big! It either impeeds the clutch bell or is too far away from the fan I have seen other people have cut down the original mounts and used them.

Any suggestions, tips, pictures would be great

Thanks

Andy

[robgt]

I have mounted a standard sensor bracket to mine, almost identically to the way shown on Aerospires website - my only change was to put the nuts on the outside for easy access with a nut spinner/pliers.

I know the CSM mount works too, but don't have pics to show you...
Cheers,
Rob

[AGW]

I know the CSM mount works too, but don't have pics to show you...
Cheers,
Rob

I was looking at wounting the CSM mount inside the frame, which is why is was impeeding the clutch bell! Maybe it only works outside the frame?

Cheers

Andy

[robgt]

I'm pretty sure that mount does fit inside the frames (I'm certain thats where Daves is fitted, and he used the CSM bracket).

I'll get pics later tonight if still needed.
Cheers,
Rob

[AGW]

Pics would be good please mate

[robgt]

I'll do my best
Probably after 9pm...

Cheers,
Rob

[AGW]

No problem, I'm not in a rush I still have loads more stuff to buy before I can get it in the air