Pirouette speed

[steve3065]

Hi all
The pirouette speed on my 600 N sport seems slow could anyone suggest why or how to speed it up? Im using a GY401 and 9251 Tail servo.
Thanks
Andy

[Made2Fade]

Putting it simply... increase the endpoints in the TX. Rudder Channel.
Lee

[Steve]

The easy answer is - increase the rudder end points on your Tx - go over 100% if you need to.

The difficult answer is - the 9251 servo is not designed to work with the 401 gyro, although it will undoubtedly work to a certain extent. It was designed for the 502 gyro. The 9254 servo is the one that works with the 401 gyro.

[steve3065]

thanks Lee for reply but the thing is, im getting full movement both ways on the tail

[steve3065]

very sorry its a 9254 not a 9251 sorry

[Made2Fade]

Increasing the end points wont change the movement. If my memory serves me right thats what the little pot does on the top of the gyro.
Lee

[Steve]

Piro speed is NOT governed by how far the tail slider moves, it's controlled by the Tx end points - wind it up in 10% increments and see what difference it makes at the field.

Trust me, it'll make it go faster.

See here for more info -> http://www.rcheliaddict.co.uk/galler...odernGyros.pdf

[steve3065]

thanks very much for replies big help

[Made2Fade]

u know where that little button is
lol
Lee