Nearly done...

[abyiss]

whats up with gyro?..bruv

just been reading...sorry..

you have the gyro plate?....or you just striaght on servos?...as the servo's do move.frames move more...lol
but with the gyro plate it takes the vides away...

601 is very easy to set up....(make shure same throw each way on gyro.37% gain.

unless its been played with.

[Disc]

whats up with gyro?..bruv

just been reading...sorry..

you have the gyro plate?....or you just striaght on servos?...as the servo's do move.

Just gryo set up. It was fine on the Predator but this machine its a nightmare.

Gives a terrible tail wag. Just replaced the pad in case it was that but gyro gain and other settings are probably the issue.

No head vibe or nasty noises from the rest of the machine. So putting this down to the Gyro right now and me not having a scooby about it

[abyiss]

you need gyro plate upgrade...its £3.50 for this plate..phill sells them.as your mounted straight onto servos'?..

i pull up my setting in my rappy...
and list it off for you,,

no problem..
(i get solid tail....no matter how i fly,,,lol.

my help..
give me 3omins..i get settings..worth ago,

[AGW]

Sorry to hijack this thread guys!

Why is the gyro not mounted at the back like with the 600e? Is it to stop it getting crapped up.?

You'll have to forgive my ignorance but I have never owned a nitro heli

Thanks

Andy

[abyiss]

no,no...fill yaboots..man,,

so it mounted onthe rear on ep

[AGW]

That seems to be general mounting place on the 600e

Check out Martins site to see the placement

http://www.ukheli.com/electronics.htm

Hope you don't mind Martin

Andy

[Disc]

you need gyro plate upgrade...its £3.50 for this plate..phill sells them.as your mounted straight onto servos'?..

i pull up my setting in my rappy...
and list it off for you,,

no problem..
(i get solid tail....no matter how i fly,,,lol.

my help..
give me 3omins..i get settings..worth ago,

Ah I actually moved the Gyro to the Back on the machine it was a lot better than being sat on the servos. Did this at flying site earlier today.

[Disc]

Been out with the T-rex 600N.

Saturday I couldnt get the Hyper to like wildcat and switched to Synth pro 10% and engine came on song and it behaved perfectly. Wildcat was fine in the Titan but the T-rex hyper hated the stuff. So for now I'm running 2 fuels although the Pro Synth the back plate was a lot cooler than the Wildcat.


Even though it is lighter than the Raptor Titan it handled the wind today stunningly well.

Radix main and tail blades 9252 servos and the 601 seems to be a really nice combo all powered by a duralite reg system.

hoping to really put sometime in this week on this machine. As I have the week off but you watch the weather go rain rain 20mph winds.

[abyiss]

so you've sorted ya gyro issuse..

?

[3dbasher]

Been out with the T-rex 600N.

Saturday I couldnt get the Hyper to like wildcat and switched to Synth pro 10% and engine came on song and it behaved perfectly. Wildcat was fine in the Titan but the T-rex hyper hated the stuff. So for now I'm running 2 fuels although the Pro Synth the back plate was a lot cooler than the Wildcat.


Even though it is lighter than the Raptor Titan it handled the wind today stunningly well.

Radix main and tail blades 9252 servos and the 601 seems to be a really nice combo all powered by a duralite reg system.

hoping to really put sometime in this week on this machine. As I have the week off but you watch the weather go rain rain 20mph winds.

you sure you know what your doing

[abyiss]

yey basher,,,how r ya man,,??

[Disc]

you sure you know what your doing

Have I ever known what I am doing

[Disc]

so you've sorted ya gyro issuse..

?

Yea the settings left in it from the Gasser removed back to the Gyros orginal settings. It was out in the Gyro and then the Tranny was wrong I was doing the gain in the Gyro menu on the 9cap and its on the end points for channel 5.

Wags every now and then but about sorted.

Actually leaning the 601 on Saturday Transfered to help a fellow club member out on the Sunday with a Futaba 611 so it was worth learning about and spending time getting it right

[3dbasher]

yey basher,,,how r ya man,,??

not bad just been out flying tonight... first time in ages was ok think i enjoyed it

[abyiss]

good..glad to here your still about,,
i got worried,,you give up..man..
dont give up dude...
you kick arse..