700 quick uk link set

[Nick B]

Wow,what a difference its made to my 700 fitting these links,its taken the slop out the linkages and it took all evening to swap

Anyone else using them?

Are they lasting any longer than stock ones?

[electricsceadu]

when i had my 700 it was the only option to get a good set of links

[Rctintin]

I have the full set on the bench ready to fit.

Trouble is, I have been playing with the 550! so no time!

Glad you found a difference.

[Cuppa]

I have used them on my 700 when it was fly bar'd on a kasama
srimok head i found them goond and did not wear as quick as stock
the head, nhp blades, n sum spares for the head are up for grabs
anyone?

[mattie-lodge]

Hi Nick,

I've have these fitted to my first Trex 700 which is over 3 years old now. Although they still do wear which you won't get over, the rate at which they wear is no way near that of the aligns ones. I might look at upgrade my other 700 to these.

[sacko]

Fast Lad Performance

Are these a straight swap for the 700 links?

[tonystevens]

Bet it wrecked your fingers though Nick.

[Nick B]

Thats good then,they certainly feel locked on better but still move nicely

Hurt my fingers on the first one but then used a vice with some rag in for one end and an adjustable spanner with some rag for the other end,not one link was marked or deformed as i never had the vice or adjustables too tight

Got one or two left to do another eve


Quick UK Retail - shop-products

Paul,you may have to swap the balls as i did.The kit contains all the balls

[Nick B]

Finished off tonight with the throttle and rudder links,it dont feel like an align heli now theres no slop anywhere

30 pounds well spent

[Cuppa]

Hi Nick,

I've have these fitted to my first Trex 700 which is over 3 years old now. Although they still do wear which you won't get over, the rate at which they wear is no way near that of the aligns ones. I might look at upgrade my other 700 to these.

only thing i would say to add to this is i found your balls
will wear faster! as over time fine grit/dust will get into the link
and as the Quick links are very hard they work like wet n dry paper
on your balls! nasty!! so keep an eye on them
Don't get a stiff neck though! lol

[Cuppa]

Bet it wrecked your fingers though Nick.

When i used Quick links some time ago i had to use a ball reamer on
every link, took bleeding ages wreckd my fingers!
Is this no loger a nesasary job?

[Nick B]

Seen ball wear on a mates 600,on the tail pitch slider because of fuel and dust.I do clean my balls on the tail and exhaust side every now and then

No reaming needed,the odd was was tighter than most but still moves freely