Trex 600LE Blade Tracking

[StreetDragster]

Hi All

A previously in-track Trex 600LE has now gone out of track a little.

I'm checking/replacing the head dampers and the feathering shaft, is there anything else that could cause this i should check?

Thanks

Matt

[waveydavey]

What blades are you using. I've had numerous sets of Torsion blades that wouldn't track reliably. Went through the same exercise as you without finding it until someone lent me a different set

[pmc1972]

I believe if your blades have a wooden core, changes in humidity can cause the wood to change shape and blades to go out of track.

best of luck sorting it
Paul

[pgkevet]

.when not shaft or dampers then look to the rest of the upper head parts... loose grip balls in particular and also wear in the seesaw bearings are tow classics.. but anywhere else up there.

[raptormark]

had the same on a le was using align 600 blades but only happened 2 or 3 times

[StreetDragster]

Hi all, thanks for the suggestions. I'm on align 600d's btw

[waveydavey]

Try a mates set of blades. I have had great results with 600d's and haven't had a problem but I have heard of reports of them going in and out of track.