t rex 700 frame screws

[steve b]

I know this has already been posted before but i cant find it
looking to replace my frame screw on my 600 and 700 helis
i can find the one on fastlad site they look a bit like align screw are these any good
what i am looking for are thoes cap type washer ones cant seem to find them

cheers steve

[SRH990]

If it's these Fast Lad Performance then they are probably the best. You really need the larger pack of 45 to do the whole heli but they're out of stock.

I use EDS drivers and they are a very tight fit in the hex heads, a few were so tight I had to wiggle the driver and push quite hard to get it in, they are very strong and I had no worries about any rounding out.

[steve b]

thats the one i have seen ,i also use eds tools as well

[Tmac]

There are also these ones

Trex Washers V2 - complete kit

[Kwickkwack]

t rex 700 frame screws

I have used Lynx screws on two helis now and in my opinion they are the best way to go
The deeper socket means no more rounding the heads

[Jamin_00]

t rex 700 frame screws

As tmac says.

I say it all the time, li Ron are the ones to have, all the others are cheap imitations
If you have had the li Ron ones you will know why.

It's like getting the quick uk canopy mounts instead of the Rc booya ones

[steve b]

Are they available in the uk

[Jamin_00]

If you mean the Li-ron bolts then no, buy direct.

[SRH990]

As tmac says.

I say it all the time, li Ron are the ones to have, all the others are cheap imitations
If you have had the li Ron ones you will know why.

It's like getting the quick uk canopy mounts instead of the Rc booya ones

I've just swapped to the Quick UK mounts from the RC Booya ones because of issues

[Jamin_00]

First time I have heard of it that way round but not everything is always perfect.

What issues you had with them? I and everyone else I know who has used them have found them to be the mutts nutts and the majority after changing FROM the QUK ones.

But I have never tried the quick release ones though!!

[pgkevet]

First time I have heard of it that way round but not everything is always perfect.

What issues you had with them? I and everyone else I know who has used them have found them to be the mutts nutts and the majority after changing FROM the QUK ones.

But I have never tried the quick release ones though!!

The quick release are brill on the 600N.. and I'd like soemthign similar on the 700N ..but reckon that the front ones would be a pain to slot in..

Obviously something else that needs redesigning on my outrageous heli thread

[SRH990]

t rex 700 frame screws

I,ve had two of the Booya thumbscrews strip their threads, although after more than 2 years use. The thread is very coarse and the front right side seems to suffer with the vibes, hopefully the change from a super shaker SZ-H to an HZ will stop the problem.

[steve b]

is the li ron v2 washer kit just a shoulder washer now, and not a cup type washer is that the v1 kit??

[Jamin_00]

Does this help?