700LE and Fastlad bolts

[mark_w]

I am just setting up my head on the 700LE and the rear cyclic bellcranks foul on the fastlad washers and bolts.

What has everybody else that has used these bolts done? just put the align ones back in?

TIA

Mark

[raptormark]

I used the normal bolts which came with kit

[mark_w]

I used the normal bolts which came with kit

Now it wont match

[Tim Procter]

Not matching is better than the servo rod fouling the bolt and crashing your heli.

It is a fact you have to use the standard Align bolts in the rear holes.

I don't loctite mine so the buggers come out easier when needed.

Not as written in the book but better when they need removing.

[Kwickkwack]

What screws are you using ?

[mark_w]

These

Fast Lad Performance

but in silver

[kenny.c]

YUP...like Tim said.....I found the same problem.....its a pain really

Ken

[J-S-Q]

I also used the normal ones in that location. I did see someone who dremeled the bolt heads so that they were shallow enough not to foul the bellcrank but I'd say that would make it very easy to strip the bolts when unscrewing them, thus defeating the point of changing the bolts in the first place!

[chugga-bug]

I used the Lynx bolts. No such problem with them.

[Jamin_00]

I used the Li ron ones before and dont recall having that issue.

Got a set on its way for this 700 so will let you know

[Kwickkwack]

I used the Lynx bolts. No such problem with them.

Thanks Ian
That was going to be my solution as well

These