600 Boom Support Brace..

[sacko]

Anyone know where else you can get these for the 600?



Fast Lad Performance

[Andy from Sandy]

If all you are after is a brace between the two support rods then in the first instance it would be easier and cheaper to make your own. You can do this with a cable tie and some heatshrink or a piece cut from an old support rod. Once you have it all done up, and shrunk the heatshrink if using that, hold it in place with some super glue.

Having just saved you £10.00 can I split it with you! lol.

[sacko]

Not a bad idea at all, cheers Andy...

....bit I like shiny things







......and no!

[J-S-Q]

Don't know where else you can get them but I did just buy a set for my 700LE and it's a decent quality item -probably got the last one from Fat Lad

[sacko]

There are 2 sizes, one for the 700 and one for the 600, 55mm and 57mm. May end up getting the 700 one and using some insulating tape.

[Andy from Sandy]

....but I like shiny things

Wrap it in baking foil, dull side in. lol!!