Trex 600 LE setup

[LipolyGone]

I've got my 600 le in front of me & am doing the set up.
At the moment it has +/- 11 deg's of pitch
& 8 deg's of aileron & elevator what do you guys normally run?

[Jamin_00]

I've not had a 50 before so I no sure what pitch range to go with so I will look at these answers too.

Well this is my 3rd 50 technically but my first that I have kept and flown

[moonmanflyer]

About 12.5 was about the max i could get out of mine with good cyclic travel, i think about 10 plus on the cyclics, normanly tweek in the field until i am happy anyway so only set it as a bench mark

[LipolyGone]

Ive physicaly set the pitch to +/- 11
& then set the cyclics to max without binding
on the aileron at max neg pitch.
I then set the elevator to the same amount
of cyclic as the aileron if that makes sence.
The only way i'm getting anymore aileron & elevator
is to reduce the pitch range.
I just thought it was a little less pitch
& cyclic pitch than i was expecting.

[moonmanflyer]

Should be able to get more mate, make sure you have your blades at 0 when mid stick.
You can adjust the rods and physically move the swash plate up and allow for more neg pitch but keep an eye that the ranges stay the same
Think my swash mixes were all 55 and then will tweek in the field

[Jamin_00]

I run 11/12 on my 90 and would have thought you would want a little more on the 50's??

[Nick B]

Mine were +-11 when last looked with the PG,but i have reduced that further in the pitch swash mix,was binding at 59% so flew at 55% but since having 55's in both machines i have reduced it to 50% and the the one i have flown is,er....scary

[moonmanflyer]

Are you coming out saturday for a fly Martin?
If you are bring it along and i can have a look

[LipolyGone]

If it's nice james i will be there