Tweet
How have people fitted the electronics in their models. I'm trying to find the best way to cram it all in. Any pics would be good.
Cheers
James
Cheers
James
-
Got go in the garage i'll post a couple in a bit.Velocity 50
Synergy N5
Fury 55 FBL
Trex 700
Light travels faster than sound, this is why some people appear bright until you hear them speak.... -
Hardly 'crammed' in. There's loads of room.
The only bit you can't see is the Duralite regulator, which is on the little shelf just above the throttle servo.JR Vibe Fifty fb (YS56)Comment
-
Here ya go.Velocity 50
Synergy N5
Fury 55 FBL
Trex 700
Light travels faster than sound, this is why some people appear bright until you hear them speak....Comment
-
Basically I have the Receiver velcro'd to the shelf above the throttle servo, the battery velcro'd to the top shelf, the Gyro on the Gyro shelf, the governor velcro'd inside the servoframe cavity on the right hand side, The Satellite velcroed to the front of the servo tray and the regulator/2 in 1 velcro'd underneath the bottom of the servo tray.
It all fits quite nicely
Sorry about the crappy iphone pics...
Cheers,
Gazza
We do not stop playing because we grow old...We grow old because we stop playing.
Stainburn Heli club
Trex600LE
Radix blades
Align DS610's on Cyclic
Align DS650 on Tail, Futaba GY520 Gyro
O.S 55 Powerplant O.S Powerboost muffler
Spectrum DX7
sigpic
www.aurorra.co.uk
www.fast-lad.co.uk
And a very proud owner of X3 Eddie Gold Stars
Comment
-
You cant see it on the pics as it aint fitted but i strap my Outrage 5000mah RX lipo underneath the whole tray. Using the bottom slots in the tray too thread the velcroe through and attach it.
Last edited by Made2Fade; 14-11-2009, 01:36 PM.Comment
-
There ya go
Regards,
Jason
Futaba 12FG/ Knight 3D / 450Pro / Beam E4 and a whole load of gliders!Comment
-
There you go..
Like said theres loads of room..
cheers
MARK
Henseleit - Three Dee RIGID V-BAR v5.2
LOGO 500 V-BAR v5.2
GAUI X4ii
PROTOS 500
MINI PROTOS 6S (stretched )
GAUI X3. 6S
JR DSX12
14SG S-BUS
proud owner of 2 x EGS
www.bmmfc.comComment
-
It loathes me to say it, (cause he will gloat) but if Downdraught posts a few pics of his setup you will see how neat it can be. I am using a GY611 so have additional equipment to mount, but the rest fits OK.Rob
TDR (in progress)
SAB Goblin 700
Vibe 90SG Vibe 500E
Trex 700 VBar, Trex 700 BeastX
Trex 600FBL, Trex 600NP, Trex 450Pro
Kalt Baron30
sigpicproud owner of Four Eddie Gold StarsComment
-
+ 7 x Eddies finest EGS's
Comment
-
What have you replaced the button head shoulder screws with???Originally posted by Fixxxer View PostComment
-
I had those on mine,a more recent upgrade as I was fed up with the cheesy Align screws.
Align screws replacement, Complete kit
One of the dearer sets as fast lads do a cheap version but the Li ron ones looks the nuts
+ 7 x Eddies finest EGS's
Comment
-
Hi, seem's my name has been used in vain and some pics are required. Tied up this evening but will take a few pics in the morning and post them for you.Sean,
Logo 700 Xxtreme
SAB Gobbler 700
SAB Gobby 500
T-Rex 700, Now FuBarred (Lol)
T-Rex 700E, 12s Fun
T-Rex 250 FBL, Less parts to break,
DJi 450 FPV Flamewheel
1 Very understanding Wife
Comment
-
Their a Liron screw set. The only place you can't use them is on the rear holes of the main bearing blocks as the arms catch.Originally posted by choppertastic View Post
Kessock Models Liron Heli ProductsVelocity 50
Synergy N5
Fury 55 FBL
Trex 700
Light travels faster than sound, this is why some people appear bright until you hear them speak....Comment
-
I found this out long ago and its well worth noting.Originally posted by Fixxxer View Post
Good point.
Comment
Comment