how do you fit a revlok to 700???

[heliward0]

as title how do you fit the revlock range of govonors to 700??
any one got one installed?
pics would be good please,,,

[Heliheaven]

I've got Revlocs on my 700 and 600's......



You need this little beauty and a very calm outlook - It WILL work, just take your time. I found a two small nuts and bolts to go through the holes in the bracket and those in the frame.

I can't really take a picture as it is very hard to see once fitted.

I hope this helps

[heliward0]

thank you mate..maybee i can adapt the align braket to fit??... i will take alook now,,

[heliward0]

I've got Revlocs on my 700 and 600's......



You need this little beauty and a very calm outlook - It WILL work, just take your time. I found a two small nuts and bolts to go through the holes in the bracket and those in the frame.

I can't really take a picture as it is very hard to see once fitted.

I hope this helps

thank you mate looks like you gave the old brain o mine a kick start,,i can adapt the rce-660 sensor bracket and it will fit a treat,, THANK YOU..

[Swashbuckler]

On my 600n I used one of the csm brackets, put a 90 degree twist in it. Dremeled a small slot in the fan housing on the outside of the frame, and used the starter shaft bearing block screw to mount it. Its easy to adjust when its on the outside of the frame, and easy to replace the sensor.