clutch liner?

[tonystevens]

im fitting a new clutch liner tonight and noticed that it has a matt surface and a shiny surface.
Which way round do i fit it or does it not matter?

[Mike W]

I fitted mine dull surface towards the clutch and stuck the shiney side down .. seems to work lol ....

[tonystevens]

any tips on fitting it? i heard to use insulation tape on the clutch to hold it in place while glue sets

[mark Taylor]

make sure you key the surface to be glue with some grit paper and the inside of the bell
then wrap a couple of layers of insulation tape around your clutch,
i use a 30 min epoxy ,then push the clutch inside the bell which then pushes the liner firmly to the bell,
leave there until fully cured
cheers

[Andy from Sandy]

Which way round do i fit it or does it not matter?

I don't think it is going to matter. After you have revved up the engine whilst holding the head the liner is going to get polished.

Have a hot start and it is going to be lovely and shiny. lol.