Another servo question

[Mart61]

Having seen the post about the non-availability of servo gears, what's the supply of gears like for the DS610s? It's just that I noted that Fast Lad was low on stock.

While I write, on searching this and HeliFreak forums, I noted that several other fliers that were at the sport flying level were using on the cyclic:

S3152
HS-5625MG
HS-5645MG

Are these any good?

[BobJ]

Hi

No real problem with supply on them, mainly as their metal gears anyway so much less likely to strip.
Also there are probably more 450 and 500 sized models out there been flown and crashed than there are larger models using the DS610 and DS620 servo's so the demand is higher for these gear sets.
As with any shortage is unfortunate but unavoidable at times, I am sure in a few weeks time the country will be awash with 510 gear sets!

Cheers
Bob

[J-S-Q]

Lets face it, if it's an Align product then it probably wont be out of stock for long. Certainly I've never had much trouble getting gears/cases for the DS510's.

[Sesame]

If it is going to happen ir short stock probably this time of year as people starting to fly again more dinks are likely

[Mart61]

Thanks guys.

[moonmanflyer]

To be fair the servos are metal gears anyway so should hold up well in a ding. In fact i crash tested some many months ago and they were all fine