kamikaze 700

[Tim Procter]

Sorry to hear of your bad luck Tom.

BTW thats a great idea securing the connectors into the receiver in the picture that Barney posted.

Will be following that route myself.

[Andy from Sandy]

If you have some another method is to thread fishing line through the gaps like the rod but go round twice through both gaps between the wires.

I agree on the connectors. I have the flight tech and the dual sky regulator and without securing it is an accident waiting to happen.

Bad luck you found out this way though.

[Tom Burgess]

Well, unfortunately the freezer was the end of my pipe Was well worth a go though, thanks to all for the suggestion

[Speeder]

Well, unfortunately the freezer was the end of my pipe Was well worth a go though, thanks to all for the suggestion

You could get someone to TIG the exhaust with aluminium.

(Weld it) Could save £120.

David

[Holst]

You could get someone to TIG the exhaust with aluminium.

(Weld it) Could save £120.

David

It might be worth a go.

They might even make some copies to sell on, at £120 they are quite expensive.

[Tim Procter]

You could get someone to TIG the exhaust with aluminium.

(Weld it) Could save £120.

David

He most certainly could but I doubt the good looks of the pipe/heli will be gone after that.

Agree about the savings though.