Trex 600 setup Help

[t-rex pedro]

The link and instructions i posted are for a DX7, so doubt they will suffice for your Futaba set. However, the title of your post will be something that others might search through and be able to use the into for a DX7 setup.

Rgds
Aidi

I did wonder that one mate.......

[Nicolasgreening]

Thanks for everyone for the help with my problems I have had lots of offers.

I will let you all know.

[Nicolasgreening]

From the symptoms you are giving, i had much the same on my NSP and it turned out to be the gov sensor. After replacing it, all ran smooth again.

Aidi you were 100% right spot on I bypassed the gov and the NSP hovers steady I was buzzing around and the mixture of the engine seems spot on bags of power I would even say a bit rich as it bogged when first spooling up.

The odd thing is that even with the gov connected and off (red light on) it still messes about I took the plug out and turned the motor over and the gov does not flash so the sensor is not working but it is odd that even with the gov off it is still playing about do you think this is the gov not the sensor????

Do these have electrics have any warranty as this is only 2 months old?