Announcement

Collapse
No announcement yet.

Running In

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Running In

    I have put 3.5 tanks in now xshould i start leaning out now ?
    i have watch the Finless vid and he recommends a couple of clicks at a time/tank where abouts should i end ?????
    Danny
    London model heli flyers

    I am learning all the time. The tombstone will be my diploma. ~Eartha Kitt

    Blade Mcx
    Blade 400 with 3 x hs65mg's, Gy401 with fs61bb tail, 450 canopy
    Yellow 600 nsp 451's on cyclic, 251 on tail with Spartan ds760 ,ds620 on throttle,Spectrum ar7100 + csm carbsmart
    Accu RC / Phoenix sims
    Spectrum Dx7se
    F16 edf
    Mavic Pro
    Spectrum DX8 dsmx
    Blade 230s v2
    http://pic7.piczo.com/Carpman68
    www.dannycablephotography.co.uk

  • #2
    I started to lean it out a little after 3 tanks but left the fine tuning until 6 tanks was used.

    Better safe than sorry.

    Keep an eye on the engine temperature (finger on the backplate) and make sure it isnt getting too hot.

    Mine has fully settled down now and the main needle valve is 1 full turn and 3 clicks out from fully closed and is running very sweet now.

    Comment


    • #3
      Got through 3 tanks this evening been lean out 3 clicks a tank ( clockwise ) think i'm about 4/5 clicks from 1 turn out
      Danny
      London model heli flyers

      I am learning all the time. The tombstone will be my diploma. ~Eartha Kitt

      Blade Mcx
      Blade 400 with 3 x hs65mg's, Gy401 with fs61bb tail, 450 canopy
      Yellow 600 nsp 451's on cyclic, 251 on tail with Spartan ds760 ,ds620 on throttle,Spectrum ar7100 + csm carbsmart
      Accu RC / Phoenix sims
      Spectrum Dx7se
      F16 edf
      Mavic Pro
      Spectrum DX8 dsmx
      Blade 230s v2
      http://pic7.piczo.com/Carpman68
      www.dannycablephotography.co.uk

      Comment


      • #4
        Carpman sorry to break the thread but are you a carp angler

        jim

        ps i am
        Cheers all Jim
        Beam e4 I LOVE IT
        Trex 450 Airwolf in progress
        walkera 4g3(complete pants
        Blade MSR Quality
        speccy dx6i
        PROUD OWNER OF 1 EGS
        If it flys fly it if it doesnt fly drink it

        Comment


        • #5
          Originally posted by beerdeor View Post
          Carpman sorry to break the thread but are you a carp angler

          jim

          ps i am
          used to be
          my pb was 26.5 mirror when i gave up due to time
          Danny
          London model heli flyers

          I am learning all the time. The tombstone will be my diploma. ~Eartha Kitt

          Blade Mcx
          Blade 400 with 3 x hs65mg's, Gy401 with fs61bb tail, 450 canopy
          Yellow 600 nsp 451's on cyclic, 251 on tail with Spartan ds760 ,ds620 on throttle,Spectrum ar7100 + csm carbsmart
          Accu RC / Phoenix sims
          Spectrum Dx7se
          F16 edf
          Mavic Pro
          Spectrum DX8 dsmx
          Blade 230s v2
          http://pic7.piczo.com/Carpman68
          www.dannycablephotography.co.uk

          Comment

          Working...
          X