Trex 700 cyclic servos??

[Arwel]

I have three Futaba 9255 that I might put in them. What do you guys recomend?

[machasm]

putting JR 8915s in mine. When it comes......
Adrian.

[Tim Procter]

putting JR 8915s in mine. When it comes......
Adrian.

JR 8915's already in mine.

[trvo]

I have 9252's in mine and they could do with being a bit stronger, 9255's will be fine but the 8915's would be a LOT better...

Trev

[steelie600]

another vote for 8915's or bls 351

[ChrisB]

Thanks Trev you just answered my question before i even asked you

I have 3 new 9252`s but thought you had them and i know you had them strip,i am swapping them for 3 9255`s with a friend for whichever 90 i get first

[BobJ]

Hi

BL351's in mine, I did have BL451's in for a while but swapped these out to the 600N on advice from some one, can't notice a big difference so far, either work very well.
Have used 9255's in a Synergy before and they will be fine although I did swap them out for 9351's after a while and these were certainly a improvement.

Cheers
Bob J

[Arwel]

Is Bobj an Align pilot flying at the Masters???

I have the Align regulator with the step down, does it produce 6V? does the 8915 cope with 6V??

[steelie600]

yup they will cope with 8v but the warranty runs out above 6v

[machasm]

Is Bobj an Align pilot flying at the Masters???

I have the Align regulator with the step down, does it produce 6V? does the 8915 cope with 6V??

Decided to go with the reactorX as the 8915s can draw quite a bit of current.
Also running the rest of the gear at 5.2V with it.
Adrian.

[Arwel]

Well I'm going for the JR 8915 @ 6V through the Align regulator and a step down for the Gyro servo. Will get a 5000 7.4v Lipo to power it. What do you guys think?

[Tim Procter]

Well I'm going for the JR 8915 @ 6V through the Align regulator and a step down for the Gyro servo. Will get a 5000 7.4v Lipo to power it. What do you guys think?

I think thats a good decision..

Get them ordered and fitted, You will be well suited because I'm running mine at 8v and they are rapid believe me, very rapid...