AleeS tail giving me issues.

[Ross Northcott]

pm me ben, i know of one that would swap you for a vbar in an instant, data pod included.

[Varelco]

Have you run the tail optimiser Ben?

[Jamin_00]

Not yet Matt no.

Never have before tbh iirc??

[swale]

I actual used a longer horn and put a z bend in the rod so the rod weren't bent....on 115 tails it was pretty good.

[Varelco]

It may be worth running it and see if it improves the tail, although with my experience on the logo it didn't do too much. If not I'm sure I read MrMel has some general figures he recommends using on the tail in the expert parameters menu, I'll have to search the settings up. What are the stops like? Soft? Unconnected?

[Planehazza]

Stiff ball links? Mine (especially on the head) were super tight.

[Jamin_00]

Sorted it today.

Played with some pro settings on the tail which I have never done and upping the stops from 20 to 30 made a huge improvement. Upped the i gain to 70 as well. Never done this before but will use the pro features a lot more
Stiff links which took some reaming and changing my horn for one that allowed me to move the ball out further to 16mm ish. I did not have enough mech gain.