Dx6i

[carpman]

i Have been trying to fly using the dx6i but having loads of problems

1 You cant take off even with full throttle , its seem that once u go past half throttle it goes down again to about 2000rpm

2 There is very little rudder input and u only get that at 1/3 throttle

3 You only get some forward elevator about half roughly at a guess and even less aft

4 you only get some left aileron and very little right

i have googled it and the only thing that i have found is that others have had the same problem , i have learn is that it is something to do with ccpm settings ....

[andylinney]

Sounds like you're possibly using the TX settings for the blade - choose a new standard Aero or Heli model memory slot and start from there by running the calibration program.

That 'should' work.

[carpman]

I have tried a new model but not tried calibrating it though , which calibration is best the simple way or the advanced way

[andylinney]

go simple

[carpman]

Got it sorted i think
I didn't calibrate though

1 Enter setup list
2 Enter reverse
3 Reverse - Aile ,Elev , Rudd & Pitc