Announcement

Collapse
No announcement yet.

Controlling the blade 400 - basics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Controlling the blade 400 - basics

    Just installed and when throttle down heli lifts off ground but then power cuts

    Presumably something I am doing wrong!

    Ideas?

  • #2
    Sounds like a servo is reversed but as they come "ready to fly" I don't know how that has happened..

    Comment


    • #3
      Karl did you get a blade 400 aswell as the cx2 ?
      OR
      Are you trying to fly the 400 on phoenix ?
      Danny
      London model heli flyers

      I am learning all the time. The tombstone will be my diploma. ~Eartha Kitt

      Blade Mcx
      Blade 400 with 3 x hs65mg's, Gy401 with fs61bb tail, 450 canopy
      Yellow 600 nsp 451's on cyclic, 251 on tail with Spartan ds760 ,ds620 on throttle,Spectrum ar7100 + csm carbsmart
      Accu RC / Phoenix sims
      Spectrum Dx7se
      F16 edf
      Mavic Pro
      Spectrum DX8 dsmx
      Blade 230s v2
      http://pic7.piczo.com/Carpman68
      www.dannycablephotography.co.uk

      Comment


      • #4
        On the Simulator guys, sorry, why i posted here

        Comment


        • #5
          You have centered all sticks when calibrating havent you..

          Comment


          • #6
            sure i did, the circle multiple times and then up and down them was little tricky

            Comment


            • #7
              what tx are you using karl cx2???

              if so follow this http://www.rcheliaddict.co.uk/showthread.php?t=9105
              Ron

              hobby-hangar.co.uk
              SWRCH-GO big or Go home!
              http://www.ultimatebuildandfly.co.uk/

              Comment


              • #8
                yep cx2 one, set up and much better. down throttle lifts now just like real thing

                also controls for the blade 400 and honeybee are working, whoaaaaaah they are much more sensitive!

                can fly the cx2 pretty well, will move onto nose in and tail in hovering next

                Comment


                • #9
                  have you downloaded the latest 1.05e version of phoenix and all of the scenes and models. if you have i'll see you on phoenix multiplayer.
                  cheers
                  matty

                  Spektrum DX7s
                  DJI F450 naza/gps Trex 500

                  http://www.facebook.com/groups/186596271481434/

                  Comment


                  • #10
                    Originally posted by Boggy View Post
                    what tx are you using karl cx2???

                    if so follow this http://www.rcheliaddict.co.uk/showthread.php?t=9105
                    Ron, followed this and are you sure invert throttle is right for flying the blade cx2? Doesnt this make throttle down make the heli go up? Sorry if I am wrong here
                    Last edited by libbykarl; 17-02-2008, 12:01 PM.

                    Comment


                    • #11
                      i have a cross in throttle ,collective and cyclic karl.
                      but you may have somthing here because i converted my controller from mode1 to mode two!

                      left stick down should be no throttle //up should be full throttle!! set yours accordingly sorry for any confusion!
                      Ron

                      hobby-hangar.co.uk
                      SWRCH-GO big or Go home!
                      http://www.ultimatebuildandfly.co.uk/

                      Comment


                      • #12
                        Cool, guess people will have diff setups

                        Even managed a quick flight on the sim with the Blade 400 - which was, well, exciting. Short lived but exciting!

                        Comment


                        • #13
                          All the 3D copters on Phoenix seem hard, but at least I can sort of get the Blade 400 in a given area for a while now, and land 2 out of 3 times.
                          John

                          sigpic Proud holder of an Eddie Gold Star.


                          Too many hobbies, not enough hours in a day.

                          Comment

                          Working...
                          X