phoenix flight sim problem

[martin uly]

havin just bought a hitec eclipse 7pro , ive tried using it with phoenix flight sim , to no avail , the sim will let me calibrate controls but wont let me fly , is there any special way to set it up as there was no instructions about it with transmitter ,thanks for helping

[cjcj1949]

If you can calibrate then the sim is seeing your radio. The sim can't stop you from flying. Do all your stick movements work? You should be able to see the heli control surfaces move and you can also show the tx and check that Phoenix displays the correct movements. You can display collective and headspeed as well. Sometimes you can get negative and positive cyclic the wrong way round.

[ModelGuard.Com]

top left click 'System' then 'your controls' then in the new window click on the arrow next to 'custom' and highlite 'new profile' then click on 'edit'. This will bring up this window....



Start with collective and clcik on the bit that says unmapped, then move your stick up and down and choose the channel that moves, it should be 6 but may not be. Do this for all your sticks and dont forget throttle at top of page. Now you will need to alter 'invert' to make each stick do as you want.
hope this helps