Tweet
So I would like to set up the Rappy 50 to be like my Titan if possible. At the moment I can do loads with the 3D version, but in real life I have servo and other issues to deal with.
I thought I would try and set up the servos to be like the ones I currently have installed. Looking at the actual aircraft setup there are two parameters, without looking at the manual I thought these may pertain to the actual servo parameters (speed and torque), but alas they mean something totaly different which doesnt translate (for me) in to the basic servo params.
From the manual:
the first value is the speed of which the servo reacts, however a smaller number here makes the servo react slower, a larger number makes it react faster... no suggested values or max / mins.
the second value represents the 'slop' , what ever the value, the TX needs to be moved more than this amount to actual cause the servo to move.
So.. how do I translate this in to the settings for my two types of servo?
I have JR591's on pitch, elevator and aileron and a 517 on the throttle (at the moment).
The 571 are supposed to be .27sec and the 519's are supposed to be .21sec, how do I translate these into phoenix?
Additionaly
Can I set up the heli for leading blade lift. I want to practise my loops which I suffer from a lot of leading blade lift pushing the heli overleft at the top of the loop (w r t to the heli itself). Any way of adding to the parameters to simulate this in Phoenix?
I thought I would try and set up the servos to be like the ones I currently have installed. Looking at the actual aircraft setup there are two parameters, without looking at the manual I thought these may pertain to the actual servo parameters (speed and torque), but alas they mean something totaly different which doesnt translate (for me) in to the basic servo params.
From the manual:
the first value is the speed of which the servo reacts, however a smaller number here makes the servo react slower, a larger number makes it react faster... no suggested values or max / mins.
the second value represents the 'slop' , what ever the value, the TX needs to be moved more than this amount to actual cause the servo to move.
So.. how do I translate this in to the settings for my two types of servo?
I have JR591's on pitch, elevator and aileron and a 517 on the throttle (at the moment).
The 571 are supposed to be .27sec and the 519's are supposed to be .21sec, how do I translate these into phoenix?
Additionaly
Can I set up the heli for leading blade lift. I want to practise my loops which I suffer from a lot of leading blade lift pushing the heli overleft at the top of the loop (w r t to the heli itself). Any way of adding to the parameters to simulate this in Phoenix?
Comment