Phoenix and DX7

[Cralis]

For the life of me, I can't get neg pitch with my DX7 in Phoenix.
I have set the throttle curve to be a V, and that's OK, but I can't get the pitch of the blades to go negative.
I've check my settings. 0 to 100 on the pitch, and when I move the stick up and down, the bar goes from 0 to 100.
However, it seems when I put the stick to 0% when flying, the throttle goes to 100%, as expected, but the heli slowly descends.
How do I get a full -10 to +10 simulation?

[Cralis]

Alas, I have negative pitch now. Restarted Phoenix. Bug?
Anyway, is there a way to use the Normal and Idle up button to switch between flight modes? Or do you have to pick one and stay with it?

[Cralis]

Sorted! Didn't realise the flight mode buttons still worked when in the sim. Woo hoo!
Inverted flight is easy!!

[Fixxxer]

Idle up should work fine in pheonix but I think you have to disable the governor in the model edit menu otherwise it just spools up, that's if I remeber rightly.

[Fixxxer]

Scratch that, governor works fine with idle up, been along time since i messed with the settings. Make sure you have the idle up switch assign correctly in phoenix.