I need help, new here an confused

[F4UCorsair]

Hello I have a Blade 450 and DX6i tranny, I can hover OK in the garden but nose in, I am not happy so I bought a new Phoenix v3.

I have tried setting up as described but failed?

Thanks in advance.
D

[Mark_T]

Not much to go on there.

Tell people which radio you are using and what exactly is not working.

[Rich23]

Hi and welcome.

What do you mean setting up as described but failed?

Read here

Rich

[F4UCorsair]

Thanks, yes I need to be less cryptic!

In the real world, I can hover my Blade 4503D both sides and tail towards me with some accuracy, using both the intermediate and advanced settings.

I got the Phoenix sim to teach me head on etc.

OK I will try to explain, first I tried to fly using the exact same settings as on my DX6i and it was a disaster!

Than from here I set up using http://www.rcheliaddict.co.uk/beginn...3-0-setup.html

Much better!

Looks like the big difference is the swash type CCPM120 is for real flying but 1SERVO90 for the simulator. (Why?)

I have tried to fine tune using my real flying settings on my but it is very twitchy and oversensitive.

So my question is how to make it more real and what parameters I should be looking at?

Thanks in advance.
D

[SaneAdam]

So, are you saying the software works ok but your finding it hard to control the heli on the sim? Are you finding it too twitchy and responsive? What are your tx settings for your 450? Rates and expo?

The first thing to try is to turn down the simulation speed in the settings menu