Help needed

[moet]

Hi just bought the phoenix, but when I give it some power the heli sinks instead of going up!!!
I am a complete novice to heli's I fly planks normally (F3a aerobatics),
any help would be great,
trany is a futaba fp-9zhp,
need to find out so I dont kill my Trex 450
Thanks
Moet

[Greig_W]

Do you have the servo reversed on your tx maybe?

[mattydred]

Hi just bought the phoenix, but when I give it some power the heli sinks instead of going up!!!
I am a complete novice to heli's I fly planks normally (F3a aerobatics),
any help would be great,
trany is a futaba fp-9zhp,
need to find out so I dont kill my Trex 450
Thanks
Moet

does ya brain hurt

[Sesame]

you can either reverse the channel on your transmiter or the one that probably easier go into the pheonix system/control then edit and click on the box under the invert heading for the channel you want to change.

[moet]

Hi sorry to be "Brain Dead" but I have have tried reversing the thottle servo on the trany and all that happens is full revs when stick is in the down position, not sure how to change in the pheonix,
Cheers lads
(any questions on planks and I will be happy to help)

[Biggles]

try reversing the pitch!!!

[warboysastro]

Go into 'My Controls' I think it is, in Phoenix, and look at the control assignments. Reverse throttle and/or pitch and you should be away.

You should have red bars going increasingly to the right as you give it more throttle.

Once it works, it's great.

Cheers - Rob