Phoenix and transmitter problem

[Rich23]

Hi

Every time I use Phoenix with my current Tx (walkera 2602/centra 2602) I seem to get a very light roll to the right once I get up to a hover or as soon as I go up to idle up it just rolls right very quickly. I've tried to trim this out and recalibrate several times but had no luck. Any ideas? I'm running Phoenix through parallels on a mac with windows 7 ultimate. It does not matter what model it is either. Although I use a align 450 pro 3d mostly


Thanks

[Darwil]

Think of a cp heli as a marble on a pudding dish which is upside down and you are trying to keep it on the dish!!!

[xygax]

Turn the tx on the screen and chech the stick movements on your tx match those on the screen tx sticks. if not bin the walkers and get a dx6i...

Steve

[Rich23]

I've just plugged the trex 100s transmitter in run a basic calibration picked a trex 600 and works normal. I will plug the walkera back in and put the sticks on screen to see if they copy my movements. Thanks

[Rich23]

Seems like I'm gonna be getting the DX6i then. The sticks on screen follow my movements just seems a naff Tx