Idle up (st1 /st2) on DX7?

[Nerra]

I received my DX7 and Pheonix on friday and managed to get it all working pretty quickly. I have noticed that the throttle hold switch is working and so I have been able to try some auto's but my idle up (or stunt mode) switch doesn't seem to be working in Phoenix. I did try a few different things to get it working but still no joy.

I really want to get it working so I can get a feel for what its like to fly inverted etc.

Has anyone managed to get it working?

[moyesboy]

Default pitch and throttle cureves on the DX7 go zero to 100%, so when you have stick down you have no throttle and full neg pitch.
So in normal mode probably you hover at 3/4 stick right way up already.

All you need to do is set the throttle curve for idle up to
100, 50, 100, a v curve. The 2nd and 4th points are inhibited unless you enter a number, if you did it would be 100, 75, 50, 75, 100. Then it will hover upside down on 1/4 stick, and hover right way up at 3/4 stick approx.

[Fixxxer]

Make sure you flick the switch thru all posistions when calibrating the tx. Also go into the radio setup and make sure the switch is assigned to the right channel. Also be aware that alot of the models have governot mode enabled as standard. You can disable this in the model edit menu I think.