Increase sensitivity of tail in Phoenix

[apstringer]

I would like to increase the sensitivity of the tail in the flight sim, so it will behave more like my 450 helicopter.
Any help would be appreciated.

[Steve]

Increase the rudder endpoints on your Tx, or in the Tx setup menu on the sim, or both.

[LaurenceGough]

Increase the rudder endpoints on your Tx, or in the Tx setup menu on the sim, or both.

That's one way of doing it but this will increase your piro rate - which may be or may not be what you're after.

The way I'd recommend is to use negative exponential (spektrum/JR) or positive exponential for Futaba on the rudder/tail channel within Phoenix or using your transmitter menu.

[Steve]

That's one way of doing it but this will increase your piro rate - which may be or may not be what you're after.

The way I'd recommend is to use negative exponential (spektrum/JR) or positive exponential for Futaba on the rudder/tail channel within Phoenix or using your transmitter menu.

Good answer.

Depends on what you actually want to achieve.

[Chris Boughton]

Increase the 'tail wash tuning' and 'tail power tuning' settings under the 'fine tuning directory', this has always been the quickest and easiest way!!!