Tweet
Guys - after my recent issue which led me to reset my tx model & re-calibrate in Phoenix, weird stuff is happening.
In normal mode, everything seems to work as it should, but in ST1 I cannot get any negative pitch - so inverted just balloons down and crashes; If I drop the throttle in normaal orientation, the heli drifts up a long way, then sort of autos down??
I have all pit curves linear and st1 & 2 throttle at 65,65,65,75,100.
In phoenix, the pitch is +/-12 and the command 'use preset throttle curve' is unticked.
Previous to this (for the last year) everything worked just fine. Can't remember how I set it up last year.
Any suggestions?
Thanks in advance
In normal mode, everything seems to work as it should, but in ST1 I cannot get any negative pitch - so inverted just balloons down and crashes; If I drop the throttle in normaal orientation, the heli drifts up a long way, then sort of autos down??
I have all pit curves linear and st1 & 2 throttle at 65,65,65,75,100.
In phoenix, the pitch is +/-12 and the command 'use preset throttle curve' is unticked.
Previous to this (for the last year) everything worked just fine. Can't remember how I set it up last year.
Any suggestions?
Thanks in advance
Comment