Wtf....?

[RotorBlade]

Guys - Ive been using Phoenix for months.....
Worked perfectly last time......
Just tried to run a session and nothing works like it did
I changed nothing, yet the models don't respond, the controls are all whacky.....WTF??
Anyone having similar probems - any suggestions?

Bemused
RB

[Gruffy]

I had problems that sound like yours. I messed with settings (display etc) and tried to lower these etc. Eventually I started to test between windowed mode and fullscreen. For some reason it got cured once I changed to window mode. So I ran a maximized window mode for a while. I think it has to do with the gfx settings in some way. I also got it working in full screen mode with other (not so high) settings after that.
I have however changed computer since then and on my new my computer this has never happened. It might be so that on the new computer I have a lot better margin, i.e. more powerful processor, gfx board etc.
Hope you solve it!

[Chris Boughton]

I think the above may help, also try recalibrating your tx into phoenix it may help!

[procol]

Are you sure you have the right model selected on your tx?

[RotorBlade]

Solved!

I woke up at 5.0am with something bugging me....

The only thing I have done with the tx recently is clear a model menu for a 450 scale project I'm building.
I have no idea how, but somehow I had flipped the tx from Mode 2 to Mode 1 The cyclic had become the throttle!!! I realised in my sleep that when I was setting up the servos in the 450 using throttle curves, I couldn't get the throttle %age to show on the graph. Didn't think too much about it at the time....
Just as well the crap weather stopped me flying this weekend. I always do a pre-flight test, but.......

Anyway - thanks for the suggestions guys, looks like I'm sorted.

Keith