Phoenix and JR PCM 10SXII

[Weetobix]

I'm having some difficulty setting up Phoenix with my newly aquired (but second hand) controller.

It's a 10 Channel JR PCM 10sxII, with all the bells and whistles.

Things to note:
The previous owner used Phoenix sim with it
When I plug in the cable, the display comes on without the reciever being turned on
When trying to calibrate it, I get no movement in the red bars

Anyone else used this transmitter with Phoenix?

Cheers!

[3dbasher]

I'm having some difficulty setting up Phoenix with my newly aquired (but second hand) controller.

It's a 10 Channel JR PCM 10sxII, with all the bells and whistles.

Things to note:
The previous owner used Phoenix sim with it
When I plug in the cable, the display comes on without the reciever being turned on
When trying to calibrate it, I get no movement in the red bars

Anyone else used this transmitter with Phoenix?

Cheers!

make sure its not switched too(on the on/off switch or it'll need setting up for budding) as you say it'll come on soon as you plug in, there's a setting in the menu which allows you to be on be not transmit.. don't know if that'll affect it, also make sure its on ppm and not pcm... best to use a fresh model memory too

[Weetobix]

I got it working in the end - flicking through the setup profiles on the transmitter, I found one marked Phoenix RC that the previous owner had set up - works like a dream now

[3dbasher]

I got it working in the end - flicking through the setup profiles on the transmitter, I found one marked Phoenix RC that the previous owner had set up - works like a dream now

lmao theres the easy answer always the way