Phoenix doesn't seem to work on Esky ET6 TX

[Peter61_uk]

I bought Phoenix V3 ........... Thought it a good idea to get a bit of practice rather than wreck my helo (I'm a complete novice at this) ........... The TX calibrates ok but doe absolutely nothing else ..............

........... and I have no idea what to be doing ............. I could really do with a bit f advice here.

Thanks Guys........

Peter

[monsigna]

dont know if you have cured this problem yet but i do know that the esky TX has two 'DIL' switches in the battery compartment, it takes 4x'AA' batt's and if you remove 'Batt 3' you will see the two DIL switches. they are numbered 1 & 2 funnily enough, you have to 'Reverse' the two switches....thats it (apparently) if switch 1 is 'on' then flick it to 'off' etc...do both switches. DO NOT FORGET TO SWITCH THEM BACK BEFORE ATTEMPTING TO FLY YOUR REAL HELI!!! good luck.

regards ade.