Tweet
ive just read your for sale post mate try these first!!
start phoenix -- in simulation
1 in the setup menu set simulation speed to 50 this will give you more time to react to movement.
2 set all the weather and wind menus to 0
click apply
in the edit aircraft menu click the rotor disc menu(center one) and set hover stability to 100.
make sure there is a red dot in the heading hold gyro box
finaly use the raptor 30 v2 not the trainer its much easier to hover
as you get better slowly speed up the simulation till your back at 100%
another tip is at the flying field as you lift off you will see a tiny patch of mud use this as a refrence point to hover over.
go on you know you want too! dont let it beat you
start phoenix -- in simulation
1 in the setup menu set simulation speed to 50 this will give you more time to react to movement.
2 set all the weather and wind menus to 0
click apply
in the edit aircraft menu click the rotor disc menu(center one) and set hover stability to 100.
make sure there is a red dot in the heading hold gyro box
finaly use the raptor 30 v2 not the trainer its much easier to hover
as you get better slowly speed up the simulation till your back at 100%
another tip is at the flying field as you lift off you will see a tiny patch of mud use this as a refrence point to hover over.
go on you know you want too! dont let it beat you
Comment