Announcement

Collapse
No announcement yet.

'Adam'?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 'Adam'?

    So, I start a Phoenix session, and some guy called 'Adam' joins. I never took notice, as I was trying to hover still.

    Then, I see something going on on the side of my monitor. This dewd is doing chaos JUST off the ground! Couldn't believe it. Tick tocks, flying backwards and doing barrle rolls... the lot! Lands, takes off, straight into an inverted hover cm's off the ground... Amazing control!

    So, I jokingly says to him, 'I bet you can't hover nose in...'. So he chuckles, and hovers in front of me in all orientations, then does the same thing inverted! No wobbles... dead still!

    I was way impressed. He wasn't a showoff as he said he was still learning, and though he had a way to go.

    Personally, I thought I had just seen the UK champ mucking about. The control this boy showed...

    I asked if he entered 3D masters and all that, and he says he's not good enough.

    WHAT!?

    I just watched....

    Then, did a few left to right passes, and he said I fly very smooth. I compliment I will embrace, as coming from him... it was pretty good.

    So, if you see this Adam guy, watch him. Impressive....

    Not sure... maybe he's a member of these forums??

    Fantastic R/C heli pilot!!
    Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
    Blade CX2 - With AR6100
    Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
    Based in Brisbane , Australia!
    Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

  • #2
    Perhaps it was Adam Turner? I think he can do nose in....

    Comment


    • #3
      He was battling to keep a stable hover... so if he's a member of these forums, I can maybe try help him out...
      Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
      Blade CX2 - With AR6100
      Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
      Based in Brisbane , Australia!
      Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

      Comment


      • #4
        I think you will find thats adam boon... boony on here.

        Ade
        www.accurc.com
        adrian@accurc.com
        This is an apple free zone
        anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

        Comment


        • #5
          Is he REALLY not good enough for 3D Masters? I hear you're pretty impressive with a heli yourself, Ade.
          Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
          Blade CX2 - With AR6100
          Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
          Based in Brisbane , Australia!
          Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

          Comment


          • #6
            what you see on a sim doesn't mean it can be done in the air with a real heli......(if only)
            Sponsored by CSM, Optifuel


            Your RC Heli World

            Comment


            • #7
              Remember the sim is just a sim, on M/S flight sim I can land 747 with ease in really bad conditions................do you think it would be the same in real life?
              Raptor 50 V3 Titan
              OS 50 hyper-MP2 pipe-9252-401 & 9254-Rev Max-Radix600-Radix 95- Kasama Head

              Trex 600N Pro R.I.P
              OS 50 Hyper-MP5-9451-611 & 9256-RevLock 20-CycLock-Radix600-Align Tail Blades

              Knight 3D
              OS 50 Hyper-MP5 Pipe-9255-Logictech 6100-Rev Lock 20-Radix600-Radix 95

              Trex SEV2
              4S TP 2000-Medusa 28-40-3400 Jazz 40-6-18-GY401 & 9650-HS65MG

              Comment


              • #8
                Nutz: well an A321 is allmost the same, but then again, i trainned on the same sim as the pilots ;-) and is a licenced flightengineer on that model, might give me a slight advantage (hint: i know how to use the autopilot during landing and only fly manual when we are cruising)

                This "Adam" that is talked about, im sure i have seen him a few times to, very kind and helpfull, he took time to see what i did wrong during tictoc´s, its no where near perfect, but then again, neither is mmy nose in hover hehe.

                Comment


                • #9
                  Originally posted by Nutz View Post
                  Remember the sim is just a sim, on M/S flight sim I can land 747 with ease in really bad conditions................do you think it would be the same in real life?
                  John Mclane can do it in die hard 49.......
                  Velocity 50
                  Synergy N5
                  Fury 55 FBL
                  Trex 700

                  Light travels faster than sound, this is why some people appear bright until you hear them speak....

                  Comment


                  • #10
                    if hes helping with tic tocs I need to talk to this guy lol
                    All the best
                    Tony.
                    Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


                    Comment


                    • #11
                      i (& gaza07) just showed adam this thread....

                      can i have a drum roll for the man himself please...........LOL

                      (he's coming any minute now and fresh from phoenix)
                      Last edited by fatmantom; 25-06-2007, 09:58 PM.
                      Tom
                      ---------------------------------------------
                      ---T-rex 600n---Knight 3D---T-rex 450 se v2---
                      ---------------------------------------------

                      Comment


                      • #12
                        the guys good i''ve bumped into him on Phoenix before but the main thing that struck me was how really helpful he is.

                        Comment


                        • #13
                          Cheers cralis and others. I really appreciate all your comments. Its great flying online because u can share thoughts and knowlegde and help each other 2 improve because i reckon what ever level your at your always learning. i aint that good and have a lot more 2 learn. I should be flying at the clubman next year as it will give good competition practice. Many regards Adam
                          Raptor 50 V2 SE, JR Servos, OS 50 Hyper, CY Muscle Pipe, CSM 720 Gyro.

                          T-Rex 450SE, Hitec Servos, CSM 560 Gyro

                          JR PCM9XII Radio

                          Comment


                          • #14
                            Welcome to the forum Adam always nice to fly with you to
                            Gaza07

                            Trex 500esp 6s Beast-X V3
                            Trex 600esp 12s Beast-X V3
                            A few Multi Rotors
                            Multi Rotor Forum http://www.multi-rotor.co.uk

                            Comment


                            • #15
                              Cheers gaza im still figuring out how 2 use this at the moment. Many regards Adam
                              Raptor 50 V2 SE, JR Servos, OS 50 Hyper, CY Muscle Pipe, CSM 720 Gyro.

                              T-Rex 450SE, Hitec Servos, CSM 560 Gyro

                              JR PCM9XII Radio

                              Comment

                              Working...
                              X