problems

[skyking]

Hi all

am new to the phoenix and new to heli's.
I got the phoenix today every time i come of the ground the heli goes of on its own i can't control it, is it me or do i need to do some settings

[zci_zr]

Check if your Tx swash plate type is set to 1 servo 90 degree, you have to setup your Tx in this mode to work with phoenix.

[skyking]

Check if your Tx swash plate type is set to 1 servo 90 degree, you have to setup your Tx in this mode to work with phoenix.

Thanks and pm sent

[skyking]

Check if your Tx swash plate type is set to 1 servo 90 degree, you have to setup your Tx in this mode to work with phoenix.

hi i have just had a look and yes its on 1 servo 90 degree

[kol]

I have seem people try the phoenix sim and can't do it straight away. What are you trying to fly, if it's a collective pitch Heli then there's a good chance that you won't be able to fly it straight away

[skyking]

I have seem people try the phoenix sim and can't do it straight away. What are you trying to fly, if it's a collective pitch Heli then there's a good chance that you won't be able to fly it straight away

am trying to fly the blade 400 or the trex 450

[zci_zr]

Just read your PM, but seem you have figure it out your self.

When your Sim Heli come off the ground, would it respond to any stick input you are giving?

[skyking]

Just read your PM, but seem you have figure it out your self.

When your Sim Heli come off the ground, would it respond to any stick input you are giving?

yes it responds to both sticks but i can get it to hover soon as i get 1ft of the ground it just goes on its own lol
its maybe just me am not sure

[kol]

If you haven't flown a 450 or 400 before then there is your problem. They aren't that easy. Try a cx blade coaxial
If that flies then there we have it. I have a mate who flies coaxial helis on the sim but can't fly the cps yet. Almost like it doesn't work.

[skyking]

If you haven't flown a 450 or 400 before then there is your problem. They aren't that easy. Try a cx blade coaxial
If that flies then there we have it. I have a mate who flies coaxial helis on the sim but can't fly the cps yet. Almost like it doesn't work.

hi
ok thanks i will try it now and let you know

[skyking]

hi
ok thanks i will try it now and let you know

Hi mate thats loads better
thank you
paul

[Kozmyk]

I put 30% Expo on Ail, Ele and Rud. Try setting yours to 30 % to 50%.

Best to alter these in Phoenix rather than your Tx so you can have different settings for different models.

Also try setting Main Rotor-Hovering Stability above 100%, 115%to125%.

[cjcj1949]

Some heli flyers can't fly the Blade 400 on Phoenix either. Well I know of one who couldn't and he had a Twister Storm. It only seems impossible. Just keep at it and your brain will sort it out for you. Don't think too much about it. Start on the bigger helis first.

Chris

[challis349]

Your much better starting on trex 600 or the likes as Chris has said, the smaller heli's are quite twitchy on there, I couldn't fly the 450 when I first got phoenix

[skyking]

Your much better starting on trex 600 or the likes as Chris has said, the smaller heli's are quite twitchy on there, I couldn't fly the 450 when I first got phoenix

Ok thank you ,i will give it a go