Announcement

Collapse
No announcement yet.

Phoenix Auto's and Trex450se

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Phoenix Auto's and Trex450se

    Doesn't matter what i try 450 se just falls out the sky,
    I have managed to get the hang using the bigger nitros
    but I cant get the 450 to auto for some reason.
    Tips welcome

    Dave
    Dave sigpic Proud owner of an E G S
    T-Rex 500ESP FBL Beastx
    T-Rex 450SE V2
    Futaba 7c 2.4ghz
    Cell-Pro Power Lab 8 & Cell-Pro 10S

  • #2
    i have the same problem...come on pro's inlighten us!!!!
    Tom
    ---------------------------------------------
    ---T-rex 600n---Knight 3D---T-rex 450 se v2---
    ---------------------------------------------

    Comment


    • #3
      the small helis are difficult to auto. even when you get it right its more of a controlled crash on the skids.

      the autos in phoenix arent perfect either which makes it harder. this will be fixed in 1.04

      Ade
      www.accurc.com
      adrian@accurc.com
      This is an apple free zone
      anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

      Comment


      • #4
        heres how i do a 450 controlled crash:

        get good height, throttle hold, negative pitch, some nose down pitch and just let it crash to the ground, if yod flare at just the right moment (get about 5deg nose up) and the slowly go to positive pitch, then you just might get lucky.

        its hard, especially because the rotor wants to stop on such a small heli

        Comment


        • #5
          Radix and V Blades are great for autos on the Trex450 - Vs are the better of the two, but theres not much in it.

          Cheers,
          Rob
          Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

          | 3D Championship

          Comment

          Working...
          X