Phoenix help please

[challis349]

Hi all just bought Phoenix

I have a trex 450, but compared to phoenix, mine is reacts alot slower, on Phoenix the 450 is everso twitchy, and can't hardly get it off the ground(only got my heli off ground and hopping around yesterday)

although the 600 on Phoenix seems to react more like my heli, so should I just use the 600 on Phoenix or try changing some setting for the 450 on Phoenix?

Any help would be appreciated, thanks

[DIJ]

I would use a larger heli to start with and then you can switch to a 450 as you progress.

[challis349]

Thanks for that, So would the 700 be best?

Also is Phoenix set to head holding gyro as my tail keeps nose keeps moving left? Is there anyway to correct this in the settings?

[waveydavey]

You can edit the models in Phoenix but most of them apart from the scale jobbies are HH. Try re-calibrating your Tx and see if this helps, it shouldn't be drifting, unless they have used a GY401 for their modelling calculations.

[challis349]

I calibrated it sticking to callums guide, but still tail drifts for some reason, although settings on my txp may be off, at 0 gyro is set to 0, at 1 gyro is set to 100, does this need changing on tx?

[DIJ]

unless they have used a GY401 for their modelling calculations.

Nice one

Thanks for that, So would the 700 be best?

I still use a 700 a fair bit as it makes it easier to practice new moves with.

[stumpe]

I've been using the 600 elec & 700 for a while to get used to orientations as the Heli is easier to see, just progressed onto trex500 as that's what I am flying now and it is much better after using the 600/700 first.

Lee

[simon1]

I would have a go at one of the raptors mate, the trex range is more reponsive on pheonix in my opinion, maybe the 50 and a bit of expo?