Phoenix and Hitec Eclipse 7

[Cralis]

Just got my simulator.

But can't seem to get the Tx calibrated!

HAs anyone get this Tx to work with Phoenix? I have the right connector. But all the controls are messed up. Throttle is reversed, and is working off the aileron/elevator stick. Throttle does nothing.

When I calibrate, it seems to handle the throttle, but when I move the aileron/elevator stick up, channel 2 shoots to FULL only when you get to the max on the stick. No channel movement before that.

Left and right moment on the ailerons only move channel 1 most of the way up, and most of the way down. nOT 100%

Rudder moves CH4 up and down correctly.

Can anyone help? I'm tryiong to use the same settings I would with my Trex.

[Cralis]

OK, change the 'FUtaba with CP', and things are a bit better. But throttle some channels are reversed. Is there somewhere I can un-reverse them in the software?

[richieclarkie]

Click System/Your Controls and click on the profile yopu want to configure.

The click the Configure Profile button

You will see all the live values from your TX being input. Look for the invert column and click the Engine and collective pitch in that column. That will reverse the channels and should work fine

[infacto]

Hi Have this one, does the hele go up and to the left in a cind of arce.I solved this setting up new on TX no ccpm

[Cralis]

Guys!

Resolved it!
Did some reversing... and now I can crash in STYLE!

All working A-OK now. So, trying to hover. Gosh... all OVER the place. I'm swopping from Mode 1 to Mode 2, and it's damn hard! Try push the nose forward, and I throttle up! Ahhh!

Going to take ages. Also, never flown the Trex yet. Coming from a Lama background. Can kinda fly the lama now on the sim, but battling with the throttle/elevator swop..

Ahh well...

[moyesboy]

Best to set up a new model in the tx for the sim.
Then by not using the mixes in the tx, you can fly all the planks and helis in the sim on the same tx model.

[Cralis]

Thanks Moyesboy - yeah, because I am trying to switch to my TREX model on the Tx, and nothing works. I was hoping I could test my Tx setup on the RC before flight - but seems that's not going to work. So, I'll make a SIM model in the Tx right?