Announcement

Collapse
No announcement yet.

new phoenix user

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • new phoenix user

    well i am a total newby to helicopters so have just installed my copy of phoenix but am having a issue where as i throttle up and take off my helicopter always moves to the left, (ps i am using a DX6i) is this correct or not?

    sorry i dont have a clue :-(

  • #2
    u can select your transmitter if you go into setup
    Chris 'CHUNK' Newby
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk

    ALIGN-TREX.CO.UK team pilot
    LYNX team pilot
    SPARTAN team pilot
    Dx18

    Comment


    • #3
      Originally posted by chris jones2.4 View Post
      u can select your transmitter if you go into setup
      Hi Chris
      sorry should have said i have used a setup recommended on this forum, so have adjusted the transmitter

      Comment


      • #4
        Hiya Wilo

        Yes its quite normal for a single rotor heli to slew slightly to the left on lift off.
        This is caused by a combination of the tail rotor and what's called ground effect (Turbulence from the helis own down wash)

        Just put in a small amount right aileron on lift off and once the heli has gained a little height return the stick to centre.
        Graham



        University of life. Studying cool .
        HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
        mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
        Phoenix, DX6i.



        x2







        Comment


        • #5
          Reinstall new transmitter on itmake sure on the throw of the sticks you dont move it in any other direction of what it tells you
          mark
          3x700s none mine

          Comment


          • #6
            Throttle up really quick and lift off nice and positively.

            You should have not much of a drift to the left but a tiny one.

            If just getting light on the skids and being very careful about actually taking off, and going left, then yes. Phoenix does this because Helicopters do this
            Trex 500 - CC450 - Blade mSR - Blade mCX - DX6i - Phoenix

            Comment


            • #7
              Originally posted by tiddler View Post
              Hiya Wilo

              Yes its quite normal for a single rotor heli to slew slightly to the left on lift off.
              This is caused by a combination of the tail rotor and what's called ground effect (Turbulence from the helis own down wash)

              Just put in a small amount right aileron on lift off and once the heli has gained a little height return the stick to centre.
              Superstar thank you i will try that now :-)

              Sorry for the dumb questions and PS thank you for your set up thread as i used your settings :-)

              Comment


              • #8
                Originally posted by wilo View Post
                Superstar thank you i will try that now :-)

                Sorry for the dumb questions and PS thank you for your set up thread as i used your settings :-)
                No such thing as a dumb question when it comes to helis m8

                And
                Your welcome
                Graham



                University of life. Studying cool .
                HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
                mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
                Phoenix, DX6i.



                x2







                Comment

                Working...
                X